08 Aug 2024
Added sentence to give LMD fragment length in Introduction to the protocol/Equipment and consumables/Control Expansion (EXP-CTL001) contents
"Lambda DNA (LMD) fragment length is 48.5 kb."
March 2023
- Includes information for control experiments on MinKNOW
8/8/2024
CDE_9109_v110_revU_10Nov2020
English
GridION
08 Aug 2024
Added sentence to give LMD fragment length in Introduction to the protocol/Equipment and consumables/Control Expansion (EXP-CTL001) contents
"Lambda DNA (LMD) fragment length is 48.5 kb."
March 2023
- Includes information for control experiments on MinKNOW
8/8/2024
CDE_9109_v110_revU_10Nov2020
English
MinION
08 Aug 2024
Added sentence to give LMD fragment length in Introduction to the protocol/Equipment and consumables/Control Expansion (EXP-CTL001) contents
"Lambda DNA (LMD) fragment length is 48.5 kb."
March 2023
- Includes information for control experiments on MinKNOW
8/8/2024
CDE_9109_v110_revU_10Nov2020
English
PromethION
08 Aug 2024
Added sentence to give LMD fragment length in Introduction to the protocol/Equipment and consumables/Control Expansion (EXP-CTL001) contents
"Lambda DNA (LMD) fragment length is 48.5 kb."
March 2023
- Includes information for control experiments on MinKNOW
January 2023
- Updated Flongle Flow Cell Priming kit name to Flongle Sequencing Expansion (EXP-FSE001) across protocol
- Changed the PromethION "Priming and loading the flow cell" section to the updated version.
January 2023
- Updated Flongle Flow Cell Priming kit name to Flongle Sequencing Expansion (EXP-FSE001) across protocol
- Changed the PromethION "Priming and loading the flow cell" section to the updated version.
January 2023
- Updated Flongle Flow Cell Priming kit name to Flongle Sequencing Expansion (EXP-FSE001) across protocol
- Changed the PromethION "Priming and loading the flow cell" section to the updated version.
January 2023
- Updated Flongle Flow Cell Priming kit name to Flongle Sequencing Expansion (EXP-FSE001) across protocol
- Changed the PromethION "Priming and loading the flow cell" section to the updated version.
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 6 months from receipt by the customer."
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 6 months from receipt by the customer."
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 6 months from receipt by the customer."
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 6 months from receipt by the customer."
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 3 months from receipt by the customer."
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 3 months from receipt by the customer."
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 3 months from receipt by the customer."
22nd December 2021
In the Flongle branch of the protocol, "Equipment and consumables", added a note to the Flongle Sequencing Expansion information: "Oxford Nanopore Technologies deem the useful life of the Flow Cell Expansion to be 3 months from receipt by the customer."
7th October 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A clarifying image has been added under "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
7th October 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A clarifying image has been added under "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
7th October 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A clarifying image has been added under "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
7th October 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A clarifying image has been added under "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
23rd September 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A note has been added: "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
- Flow cell loading instructions have been changed such that a 200 μl pipette is used to load the sequencing library into the flow cell.
23rd September 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A note has been added: "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
- Flow cell loading instructions have been changed such that a 200 μl pipette is used to load the sequencing library into the flow cell.
23rd September 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A note has been added: "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
- Flow cell loading instructions have been changed such that a 200 μl pipette is used to load the sequencing library into the flow cell.
23rd September 2021
In the Flongle branch of the protocol, "Loading the Flongle flow cell":
- A note has been added: "The adapter needs to be plugged into your device, and the device should be plugged in and powered on before inserting the Flongle flow cell."
- Flow cell loading instructions have been changed such that a 200 μl pipette is used to load the sequencing library into the flow cell.
22nd July 2021
In the Flongle branch of the protocol, the order of NEBNext consumables in "Equipment and consumables" has been corrected:
"NEBNext® Companion Module for Oxford Nanopore Technologies® Ligation Sequencing (cat # E7180S). Alternatively, you can use the three NEBNext® products below:
- NEBNext FFPE Repair Mix (M6630)
- NEBNext Ultra II End repair/dA-tailing Module (E7546)
- NEBNext Quick Ligation Module (E6056)"
Also, in the "Adapter ligation and clean-up" step, a duplicated "important" note about flow cell loading recommendations has been removed.
22nd July 2021
In the Flongle branch of the protocol, the order of NEBNext consumables in "Equipment and consumables" has been corrected:
"NEBNext® Companion Module for Oxford Nanopore Technologies® Ligation Sequencing (cat # E7180S). Alternatively, you can use the three NEBNext® products below:
- NEBNext FFPE Repair Mix (M6630)
- NEBNext Ultra II End repair/dA-tailing Module (E7546)
- NEBNext Quick Ligation Module (E6056)"
Also, in the "Adapter ligation and clean-up" step, a duplicated "important" note about flow cell loading recommendations has been removed.
22nd July 2021
In the Flongle branch of the protocol, the order of NEBNext consumables in "Equipment and consumables" has been corrected:
"NEBNext® Companion Module for Oxford Nanopore Technologies® Ligation Sequencing (cat # E7180S). Alternatively, you can use the three NEBNext® products below:
- NEBNext FFPE Repair Mix (M6630)
- NEBNext Ultra II End repair/dA-tailing Module (E7546)
- NEBNext Quick Ligation Module (E6056)"
Also, in the "Adapter ligation and clean-up" step, a duplicated "important" note about flow cell loading recommendations has been removed.
22nd July 2021
In the Flongle branch of the protocol, the order of NEBNext consumables in "Equipment and consumables" has been corrected:
"NEBNext® Companion Module for Oxford Nanopore Technologies® Ligation Sequencing (cat # E7180S). Alternatively, you can use the three NEBNext® products below:
- NEBNext FFPE Repair Mix (M6630)
- NEBNext Ultra II End repair/dA-tailing Module (E7546)
- NEBNext Quick Ligation Module (E6056)"
Also, in the "Adapter ligation and clean-up" step, a duplicated "important" note about flow cell loading recommendations has been removed.
24th June 2021
- In the Flongle branch of the protocol, "Loading the Flongle flow cell" step, an amendment has been made to step 8: "Loading Beads II (LBII) mixed immediately before use, or Loading Solution (LS), if using. LS can be used instead of LBII when preparing libraries with the Ligation Sequencing Kit (SQK-LSK110)"
- In "Equipment and consumables", an error has been corrected - the new text now says "We recommend starting with 1 µg (or 100-200 fmol) Lambda DNA for R9.4.1 flow cells. For R10.3, load 1.5-3 µg (or 150-300 fmol)."
24th June 2021
- In the Flongle branch of the protocol, "Loading the Flongle flow cell" step, an amendment has been made to step 8: "Loading Beads II (LBII) mixed immediately before use, or Loading Solution (LS), if using. LS can be used instead of LBII when preparing libraries with the Ligation Sequencing Kit (SQK-LSK110)"
- In "Equipment and consumables", an error has been corrected - the new text now says "We recommend starting with 1 µg (or 100-200 fmol) Lambda DNA for R9.4.1 flow cells. For R10.3, load 1.5-3 µg (or 150-300 fmol)."
24th June 2021
- In the Flongle branch of the protocol, "Loading the Flongle flow cell" step, an amendment has been made to step 8: "Loading Beads II (LBII) mixed immediately before use, or Loading Solution (LS), if using. LS can be used instead of LBII when preparing libraries with the Ligation Sequencing Kit (SQK-LSK110)"
- In "Equipment and consumables", an error has been corrected - the new text now says "We recommend starting with 1 µg (or 100-200 fmol) Lambda DNA for R9.4.1 flow cells. For R10.3, load 1.5-3 µg (or 150-300 fmol)."
24th June 2021
- In the Flongle branch of the protocol, "Loading the Flongle flow cell" step, an amendment has been made to step 8: "Loading Beads II (LBII) mixed immediately before use, or Loading Solution (LS), if using. LS can be used instead of LBII when preparing libraries with the Ligation Sequencing Kit (SQK-LSK110)"
- In "Equipment and consumables", an error has been corrected - the new text now says "We recommend starting with 1 µg (or 100-200 fmol) Lambda DNA for R9.4.1 flow cells. For R10.3, load 1.5-3 µg (or 150-300 fmol)."
10th June 2021
In the PromethION branch of the protocol, "Priming and loading the flow cell" step:
- Added a note to wait 20 minutes after taking the flow cells out of the fridge, and wiping off any condensation before inserting the flow cells into the device
- Added a note about correct insertion of the flow cell to avoid damaging the pins
10th June 2021
In the PromethION branch of the protocol, "Priming and loading the flow cell" step:
- Added a note to wait 20 minutes after taking the flow cells out of the fridge, and wiping off any condensation before inserting the flow cells into the device
- Added a note about correct insertion of the flow cell to avoid damaging the pins
10th June 2021
In the PromethION branch of the protocol, "Priming and loading the flow cell" step:
- Added a note to wait 20 minutes after taking the flow cells out of the fridge, and wiping off any condensation before inserting the flow cells into the device
- Added a note about correct insertion of the flow cell to avoid damaging the pins
10th June 2021
In the PromethION branch of the protocol, "Priming and loading the flow cell" step:
- Added a note to wait 20 minutes after taking the flow cells out of the fridge, and wiping off any condensation before inserting the flow cells into the device
- Added a note about correct insertion of the flow cell to avoid damaging the pins
21st April 2021
In the Flongle branch of the protocol:
- "Equipment and consumables", "DNA repair and end-prep" and "Loading the Flongle flow cell" steps: added additional information about flow cell deterioration/saturation, and updated the Flongle Sequencing Expansion information to mention Loading Solution (LS) and reduction of flow cell deterioration when storing components in glass vials instead of plastic
- "Adapter ligation and clean-up" step: updated the loading recommendations to "Following standard input recommendations, the protocol should produce enough final library (adapted DNA in EB) to load at least two Flongle flow cells. We recommend reserving enough library to load a second Flongle flow cell. We recommend loading 3-20 fmol of this final prepared library onto the flow cell. Loading more than 50 fmol can have a detrimental effect on throughput. Dilute the library in EB or nuclease free water up to a final volume of 5 μl."
- "Loading the Flongle flow cell" step: added the warning "ALWAYS wear gloves when handling Flongle flow cells and adapters to avoid damage to the flow cell or adapter."
21st April 2021
In the Flongle branch of the protocol:
- "Equipment and consumables", "DNA repair and end-prep" and "Loading the Flongle flow cell" steps: added additional information about flow cell deterioration/saturation, and updated the Flongle Sequencing Expansion information to mention Loading Solution (LS) and reduction of flow cell deterioration when storing components in glass vials instead of plastic
- "Adapter ligation and clean-up" step: updated the loading recommendations to "Following standard input recommendations, the protocol should produce enough final library (adapted DNA in EB) to load at least two Flongle flow cells. We recommend reserving enough library to load a second Flongle flow cell. We recommend loading 3-20 fmol of this final prepared library onto the flow cell. Loading more than 50 fmol can have a detrimental effect on throughput. Dilute the library in EB or nuclease free water up to a final volume of 5 μl."
- "Loading the Flongle flow cell" step: added the warning "ALWAYS wear gloves when handling Flongle flow cells and adapters to avoid damage to the flow cell or adapter."
21st April 2021
In the Flongle branch of the protocol:
- "Equipment and consumables", "DNA repair and end-prep" and "Loading the Flongle flow cell" steps: added additional information about flow cell deterioration/saturation, and updated the Flongle Sequencing Expansion information to mention Loading Solution (LS) and reduction of flow cell deterioration when storing components in glass vials instead of plastic
- "Adapter ligation and clean-up" step: updated the loading recommendations to "Following standard input recommendations, the protocol should produce enough final library (adapted DNA in EB) to load at least two Flongle flow cells. We recommend reserving enough library to load a second Flongle flow cell. We recommend loading 3-20 fmol of this final prepared library onto the flow cell. Loading more than 50 fmol can have a detrimental effect on throughput. Dilute the library in EB or nuclease free water up to a final volume of 5 μl."
- "Loading the Flongle flow cell" step: added the warning "ALWAYS wear gloves when handling Flongle flow cells and adapters to avoid damage to the flow cell or adapter."
21st April 2021
In the Flongle branch of the protocol:
- "Equipment and consumables", "DNA repair and end-prep" and "Loading the Flongle flow cell" steps: added additional information about flow cell deterioration/saturation, and updated the Flongle Sequencing Expansion information to mention Loading Solution (LS) and reduction of flow cell deterioration when storing components in glass vials instead of plastic
- "Adapter ligation and clean-up" step: updated the loading recommendations to "Following standard input recommendations, the protocol should produce enough final library (adapted DNA in EB) to load at least two Flongle flow cells. We recommend reserving enough library to load a second Flongle flow cell. We recommend loading 3-20 fmol of this final prepared library onto the flow cell. Loading more than 50 fmol can have a detrimental effect on throughput. Dilute the library in EB or nuclease free water up to a final volume of 5 μl."
- "Loading the Flongle flow cell" step: added the warning "ALWAYS wear gloves when handling Flongle flow cells and adapters to avoid damage to the flow cell or adapter."
2nd February 2021
In the Flongle branch of the protocol:
- "Equipment and consumables" step: updated Flongle Sequencing Expansion (EXP-FSE001) kit contents
- "Loading the Flongle flow cell" step: updated instructions. SBII, LBII and FB should be used from the Flongle Sequencing Expansion instead of SBII, LBII and FB from the sequencing kit
2nd February 2021
In the Flongle branch of the protocol:
- "Equipment and consumables" step: updated Flongle Sequencing Expansion (EXP-FSE001) kit contents
- "Loading the Flongle flow cell" step: updated instructions. SBII, LBII and FB should be used from the Flongle Sequencing Expansion instead of SBII, LBII and FB from the sequencing kit
2nd February 2021
In the Flongle branch of the protocol:
- "Equipment and consumables" step: updated Flongle Sequencing Expansion (EXP-FSE001) kit contents
- "Loading the Flongle flow cell" step: updated instructions. SBII, LBII and FB should be used from the Flongle Sequencing Expansion instead of SBII, LBII and FB from the sequencing kit
2nd February 2021
In the Flongle branch of the protocol:
- "Equipment and consumables" step: updated Flongle Sequencing Expansion (EXP-FSE001) kit contents
- "Loading the Flongle flow cell" step: updated instructions. SBII, LBII and FB should be used from the Flongle Sequencing Expansion instead of SBII, LBII and FB from the sequencing kit