20th February 2024
- In "Device information", the mains supply voltage has been updated to 100-240 VAC (50/60 Hz); rated current has been removed; and maximum rated power has been changed to peak power consumption.
- The link to the P2 Solo FAQ page has been updated throughout the document.
- The "Troubleshooting" section has been updated with up-to-date advice.
20th February 2024
- In "Device information", the mains supply voltage has been updated to 100-240 VAC (50/60 Hz); rated current has been removed; and maximum rated power has been changed to peak power consumption.
- The link to the P2 Solo FAQ page has been updated throughout the document.
- The "Troubleshooting" section has been updated with up-to-date advice.
13th July 2023
- In "What's in the box", a section has been added explaining the LED light patterns.
- Configuring a GPU version of Guppy with MinKNOW for MinION or PromethION 2 Solo on Linux" has been removed.
- "Updating the software via the Terminal" has been re-written with the latest instructions.
- In "Data management", the command under "Install the latest version of the MinKNOW software" has been updated.
29th June 2023
- Removed "Configuring a GPU version of Guppy with MinKNOW for MinION or PromethION 2 Solo on Windows" as the installer on the Community Downloads page is available.
21st June 2023
In "Configuring a GPU version of Guppy with MinKNOW for MinION or PromethION 2 Solo on Windows/Linux":
- For Windows, CUDA Toolkit 11.8 requirement has been added
- For Linux, the Troubleshooting section has been updated with clearer stepwise instructions
- An erroneous reference to guppyd-cpu has been removed
15th May 2023
- The sections "Configuring a GPU version of Guppy with MinKNOW for MinION or PromethION 2 Solo on Windows" and "Configuring a GPU version of Guppy with MinKNOW for MinION or PromethION 2 Solo on Linux" have been updated to remove installation instructions and add two new configuration use cases.
- In "(Advanced) Updating the software via the Terminal", a new instruction has been added: "To switch back from the PromethION 2 Solo software for GridION to the regular version of MinKNOW for GridION"
15th May 2023
The sections "Configuring a GPU version of Guppy with MinKNOW for MinION or PromethION 2 Solo on Windows" and "Configuring a GPU version of Guppy with MinKNOW for MinION or PromethION 2 Solo on Linux" have been updated to remove installation instructions and add two new configuration use cases.
3rd May 2023
- Updated the GUI screenshots to reflect the UI patch in "Installing and powering on the device (with GridION)", "Installing and powering on the device (with workstation/laptop)", "Hardware check" and "Flow cell check".
10th March 2023
- In "Troubleshooting", additional instructions have been added for exporting logs when the PromethION 2 Solo is connected to the user's own computer.
27th February 2023
- In "Installing and powering on the device (with GridION)", a link has been added to an FAQ explaining how to correctly connect the PromethION 2 Solo to a GridION via a USB Type-C cable.
- In "Data management", erroneous instructions for PromethION have been updated with correct ones for GridION.
January 2023
- Updated connection manager screenshot in "Installing and powering on the device (with GridION)/(with workstation/laptop)" and updated how users log into MinKNOW software using their Community credentials which now requires the use of OKTA as user authentification.
10rd January 2023
"Updating the software: (Advanced) Updating the software via the Terminal"
- Updated the commandline instructions to install the PromethION 2 Solo software for the first time on a GridION
3rd January 2023
"Updating the software: (Advanced) Updating the software via the Terminal"
- Updated the commandline instructions to install the PromethION 2 Solo software for the first time on a GridION
- Have added links to our Device FAQ page throughout the protocol
3rd January 2023
"Updating the software: (Advanced) Updating the software via the Terminal"
- Updated the commandline instructions to install the PromethION 2 Solo software for the first time on a GridION
- Have added links to our Device FAQ page throughout the protocol
18th October 2022
- "Installing and powering on the device" - the instructions for installing the PromethION 2 Solo software have changed to point to the Software Downloads page on the Nanopore Community.
- "(Advanced) Updating the software via the Terminal" - the instructions for installing and updating the PromethION 2 Solo software on a Linux computer have been corrected.