From portable to high-throughput benchtop devices, real-time nanopore sensing is a new generation of technology uncovering new biology across multiple sectors.
27th January 2022
- Updated mixing recommendations and adding tips regarding short term storage of the DNA library during the prep
In "Priming and loading the flow cell", further tips/notes have been added regarding preparing the library and flow cell loading.
27th January 2022
- Updated mixing recommendations and adding tips regarding short term storage of the DNA library during the prep
In "Priming and loading the flow cell", further tips/notes have been added regarding preparing the library and flow cell loading.
27th January 2022
- Updated mixing recommendations and adding tips regarding short term storage of the DNA library during the prep
In "Priming and loading the flow cell", further tips/notes have been added regarding preparing the library and flow cell loading.
23rd Sept 2021
- Updated compatibilities snippet in the 'Overview of the protocol' to include R10.3 flow cells
- Updated flow cell loading recommendations
23rd Sept 2021
- Updated compatibilities snippet in the 'Overview of the protocol' to include R10.3 flow cells
- Updated flow cell loading recommendations
23rd Sept 2021
- Updated compatibilities snippet in the 'Overview of the protocol' to include R10.3 flow cells
- Updated flow cell loading recommendations
10th June 2021
In the PromethION branch of the protocol, "Priming and loading the flow cell" step:
- Added a note to wait 20 minutes after taking the flow cells out of the fridge, and wiping off any condensation before inserting the flow cells into the device
- Added a note about correct insertion of the flow cell to avoid damaging the pins
10th June 2021
In the PromethION branch of the protocol, "Priming and loading the flow cell" step:
- Added a note to wait 20 minutes after taking the flow cells out of the fridge, and wiping off any condensation before inserting the flow cells into the device
- Added a note about correct insertion of the flow cell to avoid damaging the pins
10th June 2021
In the PromethION branch of the protocol, "Priming and loading the flow cell" step:
- Added a note to wait 20 minutes after taking the flow cells out of the fridge, and wiping off any condensation before inserting the flow cells into the device
- Added a note about correct insertion of the flow cell to avoid damaging the pins
28th January 2020
Added an optional instruction in the PromethION branch of the protocol for setting aside 1 µl of library for performing a QC experiment using Flongle
28th January 2020
Added an optional instruction in the PromethION branch of the protocol for setting aside 1 µl of library for performing a QC experiment using Flongle
28th January 2020
Added an optional instruction in the PromethION branch of the protocol for setting aside 1 µl of library for performing a QC experiment using Flongle