1st Aug 2025
- In 'Installing and powering on the device', 'Preparing for installation', 'Notes on external display', the text was updated, and in step 8, the default username and password for the device were provided.
- In 'Hardware check', instructions and screenshots were updated to align with the update to the MinKNOW software.
- In 'Flow cell check', the screenshot in step 2 was updated.
- In 'After completing a sequencing run', a new section was added for 'Stopping a sequencing run and shutting down'.
- In section 14, the title was edited to 'Updating MinKNOW from the UI using either the integrated screen or an external monitor' with updates to some instructions.
8/1/2025
P2I_9202_v1_revH_01Aug2025
Español
-
1st Aug 2025
- In 'Installing and powering on the device', 'Preparing for installation', 'Notes on external display', the text was updated, and in step 8, the default username and password for the device were provided.
- In 'Hardware check', instructions and screenshots were updated to align with the update to the MinKNOW software.
- In 'Flow cell check', the screenshot in step 2 was updated.
- In 'After completing a sequencing run', a new section was added for 'Stopping a sequencing run and shutting down'.
- In section 14, the title was edited to 'Updating MinKNOW from the UI using either the integrated screen or an external monitor' with updates to some instructions.
8/1/2025
P2I_9202_v1_revH_01Aug2025
中文
-
1st Aug 2025
- In 'Installing and powering on the device', 'Preparing for installation', 'Notes on external display', the text was updated, and in step 8, the default username and password for the device were provided.
- In 'Hardware check', instructions and screenshots were updated to align with the update to the MinKNOW software.
- In 'Flow cell check', the screenshot in step 2 was updated.
- In 'After completing a sequencing run', a new section was added for 'Stopping a sequencing run and shutting down'.
- In section 14, the title was edited to 'Updating MinKNOW from the UI using either the integrated screen or an external monitor' with updates to some instructions.
7/7/2025
P2I_9202_v1_revG_07Jul2025
English
-
7th July 2025
A new section was added to this document, 'Operating system update on P2i' with subsections on '(Advanced) Downloading the ISO image and burning it to a USB drive' and 'How to boot from USB'.
7/7/2025
P2I_9202_v1_revG_07Jul2025
Español
-
7th July 2025
A new section was added to this document, 'Operating system update on P2i' with subsections on '(Advanced) Downloading the ISO image and burning it to a USB drive' and 'How to boot from USB'.
7/7/2025
P2I_9202_v1_revG_07Jul2025
中文
-
7th July 2025
A new section was added to this document, 'Operating system update on P2i' with subsections on '(Advanced) Downloading the ISO image and burning it to a USB drive' and 'How to boot from USB'.
6/2/2025
P2I_9202_v1_revF_02Jun2025
English
-
2nd June 2025
- In section 3, 'Preparing for installation', port 80 was added alongside port 443 for outbound-only access to the internet and a note was added to warn users that the external monitor should not be turned off or unplugged whilst the device is turned on, as this will result in a problem with the integrated screen.
6/2/2025
P2I_9202_v1_revF_02Jun2025
Español
-
2nd June 2025
- In section 3, 'Preparing for installation', port 80 was added alongside port 443 for outbound-only access to the internet and a note was added to warn users that the external monitor should not be turned off or unplugged whilst the device is turned on, as this will result in a problem with the integrated screen.
6/2/2025
P2I_9202_v1_revF_02Jun2025
中文
-
2nd June 2025
- In section 3, 'Preparing for installation', port 80 was added alongside port 443 for outbound-only access to the internet and a note was added to warn users that the external monitor should not be turned off or unplugged whilst the device is turned on, as this will result in a problem with the integrated screen.
3/21/2025
P2I_9202_v1_revE_21Mar2025
English
-
21 Mar 2025
- In "Data management", a warning was added regarding the writing of data to a networked drive, as this is not currently supported by Oxford Nanopore.
- In "Updating the software", instructions were provided on updating MinKNOW using the device's integrated screen.
3/21/2025
P2I_9202_v1_revE_21Mar2025
Español
-
21 Mar 2025
- In "Data management", a warning was added regarding the writing of data to a networked drive, as this is not currently supported by Oxford Nanopore.
- In "Updating the software", instructions were provided on updating MinKNOW using the device's integrated screen.
3/21/2025
P2I_9202_v1_revE_21Mar2025
中文
-
21 Mar 2025
- In "Data management", a warning was added regarding the writing of data to a networked drive, as this is not currently supported by Oxford Nanopore.
- In "Updating the software", instructions were provided on updating MinKNOW using the device's integrated screen.
1/22/2025
P2I_9202_v1_revC_08Dec2023
English
-
January 2025
- In "Overview", added a link to device FAQs.
- In "Installing and powering on the device", the link for "Updating the software via the UI" has been amended, and a new link added for P2i software updates. Also, a new instruction has been added: "Once the device has booted, you will see the MinKNOW software load on the integrated screen and a login screen on the external monitor. You will be prompted to enter the password for the device. The default password can be found in the Quick Start Guide. You will then be prompted to update your password. Set a new password using the following criteria."
1/22/2025
P2I_9202_v1_revC_08Dec2023
Español
-
January 2025
- In "Overview", added a link to device FAQs.
- In "Installing and powering on the device", the link for "Updating the software via the UI" has been amended, and a new link added for P2i software updates. Also, a new instruction has been added: "Once the device has booted, you will see the MinKNOW software load on the integrated screen and a login screen on the external monitor. You will be prompted to enter the password for the device. The default password can be found in the Quick Start Guide. You will then be prompted to update your password. Set a new password using the following criteria."
1/22/2025
P2I_9202_v1_revC_08Dec2023
中文
-
January 2025
- In "Overview", added a link to device FAQs.
- In "Installing and powering on the device", the link for "Updating the software via the UI" has been amended, and a new link added for P2i software updates. Also, a new instruction has been added: "Once the device has booted, you will see the MinKNOW software load on the integrated screen and a login screen on the external monitor. You will be prompted to enter the password for the device. The default password can be found in the Quick Start Guide. You will then be prompted to update your password. Set a new password using the following criteria."
10/31/2024
P2I_9202_v1_revC_08Dec2023
English
-
29th April 2024
- Corrected the specifications in "Device information"
10/31/2024
P2I_9202_v1_revC_08Dec2023
Español
-
29th April 2024
- Corrected the specifications in "Device information"
10/31/2024
P2I_9202_v1_revC_08Dec2023
中文
-
29th April 2024
- Corrected the specifications in "Device information"
10/23/2024
P2I_9202_v1_revC_08Dec2023
English
-
29th April 2024
- Corrected the specifications in "Device information"
10/23/2024
P2I_9202_v1_revC_08Dec2023
Español
-
29th April 2024
- Corrected the specifications in "Device information"
10/23/2024
P2I_9202_v1_revC_08Dec2023
English
-
29th April 2024
- Corrected the specifications in "Device information"
10/23/2024
P2I_9202_v1_revC_08Dec2023
Español
-
29th April 2024
- Corrected the specifications in "Device information"
10/23/2024
P2I_9202_v1_revC_08Dec2023
English
-
29th April 2024
- Corrected the specifications in "Device information"
10/23/2024
P2I_9202_v1_revC_08Dec2023
Español
-
29th April 2024
- Corrected the specifications in "Device information"
4/29/2024
P2I_9202_v1_revC_08Dec2023
English
-
29th April 2024
- Corrected the specifications in "Device information"
