11th June 2025
- Image showing gap around the sides of device when CTC, Flongle adapter or flow cell is inserted was moved from section 7 to 4.
- Section 6, 'Hardware check' was updated with new instructions and screenshots to align with recent release of MinKNOW.
6/11/2025
M1D_9214_v1_revE_11Jun2025
Español
MinION
11th June 2025
- Image showing gap around the sides of device when CTC, Flongle adapter or flow cell is inserted was moved from section 7 to 4.
- Section 6, 'Hardware check' was updated with new instructions and screenshots to align with recent release of MinKNOW.
6/11/2025
M1D_9214_v1_revE_11Jun2025
中文
MinION
11th June 2025
- Image showing gap around the sides of device when CTC, Flongle adapter or flow cell is inserted was moved from section 7 to 4.
- Section 6, 'Hardware check' was updated with new instructions and screenshots to align with recent release of MinKNOW.
5/6/2025
M1D_9214_v1_revD_06May2025
English
MinION
6th May 2025
- Updated link for 'Safety and regulatory information' under section 1, 'Device information'.
- Updated screenshots for section 6 "Hardware check" step 2 and section 7 'Flow cell check' step 1.
5/6/2025
M1D_9214_v1_revD_06May2025
Español
MinION
6th May 2025
- Updated link for 'Safety and regulatory information' under section 1, 'Device information'.
- Updated screenshots for section 6 "Hardware check" step 2 and section 7 'Flow cell check' step 1.
5/8/2025
M1D_9214_v1_revD_06May2025
中文
MinION
6th May 2025
- Updated link for 'Safety and regulatory information' under section 1, 'Device information'.
- Updated screenshots for section 6 "Hardware check" step 2 and section 7 'Flow cell check' step 1.
4/10/2025
M1D_9214_v1_revC_02Apr2025
English
MinION
2nd April 2025
- Updated screenshots for section 6 "Hardware check" step 2 and section 7 'Flow cell check' step 1.
- In 'Flow cell check', the table was updated with storage conditions for unopened flow cells.
- A warning was added to 'Flow cell check' stating that there will be a small gap around the sides of the device (image attached), when a flow cell is inserted.
4/10/2025
M1D_9214_v1_revC_02Apr2025
Español
MinION
2nd April 2025
- Updated screenshots for section 6 "Hardware check" step 2 and section 7 'Flow cell check' step 1.
- In 'Flow cell check', the table was updated with storage conditions for unopened flow cells.
- A warning was added to 'Flow cell check' stating that there will be a small gap around the sides of the device (image attached), when a flow cell is inserted.